Slow close door hinge – A door hung with slow close door hinge prevent the door from slamming into the wall or any furniture behind the door. For hinge to work properly, but it should be adjusted. Adjusting a slow close door hinge already hung on the door will take just a few minutes. These hinges are equipped with a PIN code to use while you make adjustments. Do not pin, use a finishing nail.
To adjust a slow close door hinge bracket, close the door and insert the voltage handle on either the top of the hinge. Or in the correct hole in the slot adjustment on the front of the hinge, depending on the style of your slow close door hinge. Turn the tension lever to the left until you can place the adjust pin loosely into the hole on the right side of the slot adjustment. Open the tension on the tension lever and allows the adjustment pin to rest against the edge of the slot adjustment.
Test opening and closing of the to adjust a slow close door hinge bracket. If you need to continue to make adjustments reinstate tension lever and turn left again. Remove the alignment pin from the hole and place it in the hole furthest to the right in the slot adjustment. Allow pin to rest against the edge of the slot again and test the door again.