Build Garage Door Screen Panels


Garage Door Screen Panels – Construction of a screen door lets you create a door for an opening of any size, while predefined screen doors are available in specific sizes. Using treated wood is best for door that are exposed the elements, but regular untreated woods is fine for other areas. Screen material comes in gray or black depending on how you want to be transparent. All necessary materials are available in stores hardware upgrades for most or home.

Instructions: 1) Measure the length of your garage door screen panels frame with a tape measure. Cut 1 – inch vertical long side parts 4 inches to measure the exact height, against a circular saw. Measure the width of the door frames and subtracts 8 inches, so the piece is cut up, middle and bottom fit into the vertical pieces. Use a square building to mark the cutting line to ensure that all the cuts are straight. 2) Put the wood chips on the floor in the shape of the garage door screen panels. Place flat wooden clamps 2 inches on each joint piece of wood. Use a pencil to draw the holes in the brackets. Remove the supports. Drill pilot holes of 1/2 inch down into the support whole marks made. Replace the brackets on the drilled holes.

You May Also Like

Leave a Reply