Exterior barn door hardware – Rail or sliding barn door hangers on doors are used to separate large areas in industrial buildings and on primary inputs on many rural outbuildings. They require little maintenance. Properly installed, this material can last for generations. From time to time, the lubricant must be applied to maintain smooth ride door. Before attempting to lift heavy doors off their tracks, hire an assistant to prevent injuries or damage to the door.

Exterior barn door hardware removes the stop at the end of the track. Stops typical doors are bolted to the wall at the end of the runway or bolted through the bottom and rest on the track itself. Use a sturdy ladder to reach the track. Remove the bolts with a socket wrench and set aside the material with fasteners to be reinstalled.

Place the exterior barn door hardware, with an assistant, through the open end that you created in the cursor. Keep the front edge support and leave the back edge gently. Lay the door on a pair of trestles to allow access to the rollers on the upper part of the door. Run a hose to the top of the ladder with a pressure nozzle and spray the roller track to remove all dust and debris. Have a piece of beeswax hand over the entire length of the inside of the track, rubbing along the bottom channel wheel lubricated for smooth action.