Wavy subway tile – What is old is new again as subway tile is now a trendy option for kitchen, bath and fireplace surrounds. Learning to add subway tile is a simple do-it-yourself project with the right preparation and patience.
Spread a thin layer of glue over the surface with the notched end filler, the holding angle of 45 degrees. Make sure to work in small sections to avoid the glue dries. Place the first tray that sits in a twisting motion. Lay the next tiles, using spacers at the corners for even the joints. Wavy subway tile with protruding sidebars, called heels, do not need to haul. Continue laying tile in this manner, working a small area at a time.
Wipe away any excess glue from the tile surface with a damp cloth. Use a small stick to scoop out excessive adhesive material between the plates. Periodically, check the level by adding trowel tiles. If a tag does not lie flat, bend it up, scrape off the glue and start over. Use a tile saw to cut the edge pieces and use wire cutters to cut the tiles around electrical outlets and plumbing. Let the adhesive dry and remove the spacers prior to grouting wavy subway tile.