Lucite dining chairs – Dining chairs often come without any filling, what can make sit in them very uncomfortable. Sewing a cushion to attach to the chair is a process quick and easy. A pillow can enhance the beauty of a dining room chair at the time which makes it more comfortable to sit. Measure your dining room chair seat. Many of them measure approximately 16 1/2 inches (41,25 cm) on each side. As the size of the seat varies among different manufacturers, it is best to obtain accurate measurement.
Radiate the shape of the pad that you would like to (square, trapezoidal, round) on a piece of paper using the measurements from the lucite dining chairs, to determine the size of the pad. Add 2 inches (5 cm) measures if you are using foam 1/2 inch (1.25 cm) and 3 inches (7.5 cm) If you are using 1 inch (2.5 cm) foam, to accommodate it, and leave 1/2 inch (1.25 cm) seam allowance.
It turns the cover to the right and iron seams to flatten them. Place the foam or stuffing inside the cover of the pad. Sew the open edge closed, either by hand or machine. Place the pillow on the lucite dining chairs mark the places where the main chair back supports touch pad. Folded a piece of tape of 20-inch (50 cm) long and hand stitch to the back edge of the pad at each of these marks. Place the cushion on the Chair and tie straps to the rear brackets.
