Vintage Tile Backsplash Ideas

Vintage Tile Backsplash Awesome

Vintage tile backsplash are often used on kitchen backsplashes for its style, versatility and light reflective properties. Because they do not require the use of an expensive tile saw to install, many homeowners put up themselves. Vintage tile backsplash grout much the same way as larger plates, with the exception that the entire facility will be covered in grout to avoid missing any of the joints.


Wait at least 48 hours after installing vintage tile backsplash, to ensure that the mortar has dried. Tile is a non-absorbent material; it cannot absorb moisture from the mortar to help dry out, so that the moisture must escape through the many joints in the installation.

Scoop up a fist large amount of grout is ground on the end of an epoxy grout float and the pressure on the plates. Drag float across the tile from several angles that includes all of the vintage tile backsplash and their joints with joint compound. This will remove any excess grout from the tiles, but not from the joints. Inspect the installation carefully and push extra sealant in all joints that missed on the first pass.

Let the grout dry for 10 minutes then work a damp grout sponge in a circular motion over a small portion of the plates. Turn it over and rework the same section. Wait two hours then polish the surface of the vintage tile backsplash with a soft cloth to remove grout haze. Grout continues to dry for two to three weeks. Fill the corners and right angles of installation of a thin string of cut dense grout that match in color.

You May Also Like